01584 879288

Why Pearce Cycles?

  • We actually ride bikes!
  • Dedicated test centre
  • Friendly Advice
  • Fast Delivery

Service Costs

We Offer 3 Levels of Service, choose the one which suits your needs 

Basic Service - £30
- Full safety inspection. Your bike gets checked for any faults with regard to safety and general mechanical condition. Faults that require parts replacing are noted and we will provide an estimate for the cost. All fastenings are checked, chain is checked for wear and lubricated, headset checked for play, brakes and gears are adjusted, tyres inflated to recommended pressure and the bike is test ridden.

 
Standard Service - £50 - Adding to the basic service, all cables, derailleurs & gear shifters are checked, degreased and replaced if necessary. Brake pads are checked and replaced if required. Chain/cassette/chainrings are degreased then lubricated. Minor wheel true if required.


Deluxe Service - £90 Cable / £110 Hydraulic Brakes - Extras above Standard Service, hubs, headset and bottom bracket are cleaned then greased (where applicable), both wheels are trued, hydraulic brakes are bled (where applicable) and the bike gets a polish. Your bike will ride and look like new after this one!

All service prices do not include any parts needed and subsequent fitting charges.


Labour charge per hour: £30.00

Minimum labour charge: £5.00


We will carry out any work from a puncture repair to a full frame rebuild. Below is a small selection of the work we carry out. Please call for specific details.

  • Puncture repair: £10 (including labour and standard inner tube)
  • Wheel true: from £10 depending on individual requirements
  • Hydraulic brake bleed: £15 per brake
  • Rockshox Reverb seatpost bleed: £15 (externally routed) or £20 (internally routed)
  • Tubeless tyre setup: £35 per wheel or £60 a pair (includes tape, valves and sealant)
  • Fork lower leg service: £40 (remove lowers, clean, re-grease and replace oil. Dust wiper seals are extra if required)
  • Rear air shock sleeve service: £20 (remove air can, clean and lube)
  • Specialized Command post service including seal kit: £50
  • Shimano Di2 update and diagnostics check: £20
  • Frame pivot bearing replacement: £Please Call our workshop to discuss your individual needs

Wheel Building

We offer top quality wheel building and repairs, we are able to work with every type of wheel around. Specialising in custom wheel builds, we have highly trained technicians with hundreds of wheels worth of experience in mtb (especially downhill), road and bmx. Tying and soldering is also a speciality of ours.


Wheel Building
All Standard Wheels Enve Wheels
Lace & True Rebuild Rim Change Lace & True Rebuild Rim Change
£30.00 £35.00 £25.00 £35.00 £40.00 £35.00


True all wheels £5.00 - £10.00 per wheel depending on requirements.


Mavic Tubeless and Straight Pull Wheels
Lace & True Rebuild Rim Change
£ call us £ call us £ call us

We can carry out work on most specialist wheels, too many to list so please ring or email for prices.

All prices are exclusive of parts, postage and packaging.


Specialist Repairs

IronHorse Sunday frame repairs

Many Sundays have spacing problems on the rear suspension pivots because during manufacture some bearings are mounted at varying widths from the frame centre line. We take measurements from your frame and manufacture custom spacers to a high tolerance. We can also repair worn DW links, by machining worn surfaces and then manufacturing custom spacers to compensate for the material taken away.

Call us for more info and prices.


Thread repairs


We can repair damaged threads on all major metric thread sizes - M5, M6, M8, M10, M12 - using the 'Wurth Time-Sert' system. This is far stronger than a Heli-coil type repair, it uses a hardened steel threaded insert, making it stronger than it was originally! Prices from £12.

Mech hanger repair - has your frame got a non-replaceable hanger? We have thread inserts that will replace your damaged thread, making it stronger than new!! Prices from £15.

Crank arm threads - have you ridden with a loose pedal and damaged the thread in your expensive crank arm? We have thread inserts to replace the damaged thread, making it stronger than new!! Prices from £15.


Shimano Di2 set-up and fault finding


We have the latest diagnostic software to set-up and check all variations of Shimano Di2 electronic shifting. We can also tailor your gearing to your specific needs by altering shift speed and button configuration.