Workshop

Highly qualified mechanics (Cytech 2/3) with years of experience repairing, tuning, riding and racing bikes will carry out the work on your bike.  Our fully equipped workshop offers a complete range of servicing options plus more advanced services including brake bleeding, suspension servicing, Di2 troubleshooting, eBike diagnostics and Invisiframe fitting.  We have access to machining and fabrication equipment which enables us to manufacture small parts for one off modifications and special applications.

Our workshop operates on a diary system.  Please call or email us in advance to book your repair into our diary. We realise the unexpected can happen, so we'll always try to accommodate last minute requests but during busy periods this isn't always possible.

Contact our workshop on 01584 879288 or use our online booking form here

Bike Servicing

We offer three levels of servicing.  You can see what's included at each level here

If you're unsure which is the most appropriate, we can advise when you drop your bike in or just give us a call. 

We don't expect bikes to be immaculately clean when brought in for servicing, but they do need to sufficiently clean for us to be able to inspect and adjust components.  Please ensure the bike is not covered in mud, otherwise it will need to be washed prior to servicing at an additional £15 cost.

Basic Service / Safety Check - £30 - Full safety inspection. Your bike gets checked for any faults with regard to safety and general mechanical condition. Faults that require parts replacing are noted and we will provide an estimate for the cost. All fastenings are checked, chain is checked for wear and lubricated, headset checked and adjusted, brakes and gears are tuned, minor wheel truing in bike, tyres inflated to recommended pressure and the bike is test ridden.

Standard Service - £50 - In addition to the Basic Service, all cables, derailleurs & gear shifters are checked, tuned or replaced. Brake system checked and parts replaced if necessary. Chain/cassette/chainrings checked and lubricated where required. Hub bearings are checked and adjusted. Minor wheel truing in truing stand.

Deluxe Service - £90 Cable / £115 Hydraulic brakes - Extras above Standard Service - hubs, headset and bottom bracket are stripped, cleaned and greased or bearings replaced if necessary. Drivechain components are removed and cleaned. Wheels are trued in truing stand if required. Hydraulic brakes are bled (where applicable) and the bike gets a polish. Your bike will ride and look like new after this one :)

**Service prices do not include any parts needed and subsequent fitting charges.**

Suspension Servicing

We offer full servicing ourselves and through J-Tech Suspension on all major suspension brands including Fox, Rockshox, Marzocchi and Ohlins. 

  • Fork lower leg service - £30 - remove lowers, clean, re-grease and replace oil. Dust wiper seals cost extra if required.
  • Rear air shock sleeve service: £20 - remove air can, clean and lubricate
  • Rockshox Reverb seatpost bleed: £15 (externally routed) or £20 (internally routed)
  • Specialized Command post service including seal kit: £50
  • Full fork and shock services from £115

 Wheels

We are able to work with every type of wheel.  We can supply and build your dream set of hoops no problem. We spend plenty of time setting up wheels tubeless.  We stock Stans, Muc-Off and Orange Seal sealants and accessories as well as various rim defenders.  We know what works well!

 All Standard Wheels

  • True: £15
  • Lace & true: £35
  • Rebuild: £40
  • Rim change: £30
  • Tubeless tyre setup: £35 per wheel including tape, valves and sealant.
  • Puncture repair including new standard tube: From £11 

Call us for prices on Enve wheels / Mavic tubeless or straight pull wheels  

Brakes

  • Hydraulic disc brake bleed £20 per brake 

Thread repairs

We can repair damaged threads on all major metric thread sizes - M5, M6, M8, M10, M12 - using the 'Wurth Time-Sert' system. This is far stronger than a Heli-coil type repair, it uses a hardened steel threaded insert, making it stronger than it was originally! Prices from £12.

Mech hangers - has your frame got a non-replaceable hanger? We have thread inserts that will replace your damaged thread, making it stronger than new!! Prices from £15.

Crankarms  - have you ridden with a loose pedal and damaged the thread in your expensive crank arm? We have thread inserts to replace the damaged thread, making it stronger than new!! Prices from £25.

 

Invisiframe Protection

We supply and fit Invisiframe protection kits for frames, forks and cranks.  These custom designed kits are specific to frame model and size to give near 100% coverage and offer the best protection against scuffs and stone chips.  You can check if a kit is available for your frame along with pricing over on the Invisiframe website.  When we supply the kit, our fitting charge for a frame kit is £90 on a new frame and £120 on a used frame which will require more thorough cleaning.  Fork protection and crank protection kits are also available.

Muc-Off Ceramic Coating

The Muc-Off Ceramic coating is a highly advanced, durable, silicon-infused protective layer that chemically bonds to your paintwork, producing a high-performance hydrophobic layer for maximum water and dirt shedding properties. It’s designed to keep your steed cleaner for longer, and much easier to clean and maintain. This is because the coating drastically reduces the surface tension, providing long term, year-round protection to your pride and joy, even in the harshest weather conditions. It also contains UV protection to help ensure your paint doesn’t fade in direct sunlight and can help reduce the risk of micro scratches.  

Safe to use on paintwork, carbon fibre, metal components, wheels, vinyl and rigid plastic trim with protection lasting up to 2 years as its chemical resistant. 

From £50 applied to frame.

Diagnostics & E-Bikes

We have the latest diagnostic software to set-up and check all variations of Shimano Di2 electronic shifting. We can also tailor your gearing to your specific needs by altering shift speed and button configuration. 

We are fully equipped to test, fault-find and update all Bosch, Specialized (Brose / SL ) Shimano, SRAM Powertrain, Mahle Ebikemotion & Fazua systems.

  • Update and diagnostics check: From £20, but FREE lifetime updates on all bikes purchased from ourselves.
  • Out of warranty Brose & Bosch motor servicing  - We'll remove the motor, ship it to eBike Motor Centre (Performance Line Bearings) full insured and re-install it on return + perform an update check. POA
  • We are happy to process warranty claims for the above brands on bikes purchased elsewhere.  Price varies depending on brand and warranty process. POA

 **We are unable to diagnose electrical problems on bikes fitted with other systems.  Please contact your place of purchase for assistance**

 

Contact us on 01584 879288 or email workshop@pearcecycles.co.uk